features:
o boom arm w/grip head
o sliding, rocky mountain leg
grip tips:
right-hand rule
- When setting a boom arm horizontally, turn the stand's grip head clutch handle
towards you and position the boom arm so its load will be to the right of
the head. When a load is placed on
the boom arm, its weight will naturally tighten rather than loosen the grip
head. Repeat this for the grip head at the end of the boom.
Position a horizontal boom arm over one leg of the
c-stand.
Sandbag the tallest leg of the c-stand so none of the
bag touches the ground.
To use on sloped terrain, place the two lower legs at
the lowest spot on the ground, loosen the upper leg and raise until the
stand is level.
